Brake Dust Remover is designed to remove brake dust, iron particles, and industrial fallout from your car’s paint and wheels.

This spray-on formula dissolves a wide range of contamination quickly and safely. It works on all clearcoat finishes and all types of wheels, including painted, chrome, polished, and coated aluminum. Additionally, it is acid-free, pH balanced, biodegradable, and VOC-compliant, making it safe for both your car and the environment.

How It Works:

When applied, Brake Dust Remover reacts with iron and other contaminants. Usually, it changes color to a deep purple-red. This shows that the product is dissolving harmful particles. Afterward, you can rinse the surface with water. This prevents corrosion and protects thin modern paint. If you do not see a color change, it means your wheels or panels are already clean. Either way, you can move to the next detailing step with confidence.

What It Does:

3D Brake Dust Remover safely removes:

• Brake dust from normal driving.
• Iron contamination from traffic or industrial fallout.
• Road film and also oily residues.
• General chemical contamination from water.

When to Use:

Use the product every time you wash your wheels. Brake dust builds up with each use. For body panels, use 3D Brake Dust Remover during a prep wash before detailing or paint correction. Avoid using it on panels during a maintenance wash if the car has protective coatings like wax or sealants. For ceramic-coated vehicles, it is safe and will not damage the coating.

When doing any type of paint correction, anything already on the surface of the painted body panels is going to be abraded off, conventional car waxes, synthetic paint sealants and ceramic paint coatings. For this reason, the recommendation is to use 3D BDX for a Prep Wash.

Maintenance Wash – A maintenance wash is a wash process intended to clean cars already detailed, in excellent condition and regularly maintained. As such, there’s less need for extreme cleaning processes and products like iron removers and chemical decontamination sprays. In fact, the whole point of a Maintenance Wash is to be as careful and NON-invasive. Thus to avoid marring the paint during the process as well as preserving whatever the protective coating was chose to seal the paint surface, be it a ceramic coating, conventional car wax or synthetic paint sealant.

Body Panels – When doing a maintenance wash, the type of Last Step Product used on the painted body panels is a key deciding factor as to whether to use 3D BDX or not.

Cars with Ceramic Coatings – A quality ceramic coating properly installed is chemical resistant, at least a lot more chemical resistant than a conventional car wax or synthetic paint sealant. Thus, if you feel the need to check for or ensure there is no iron or chemical contamination on your car’s finish. So, it’s perfectly okay to use 3D Brake Dust Remover on a car with ceramic coating as the ingredients in this product will not interfere with the coating.

Cars with Conventional Car Waxes or Synthetic Paint Sealants – The downside to using conventional car waxes and synthetic paint sealants are they are not near as chemical resistant as a ceramic coatings. Thus, using iron removers and chemical contamination sprays will tend to remove these types of sacrificial protective coatings pre-maturely. It’s just the nature of the beast. So generally speaking, you don’t use iron removers when doing a maintenance wash on cars protection with car waxes and/or synthetic paint sealants.

Why use 3D Brake Dust Remover over other options? – Most iron removers are great for a single purpose and that is to remove iron or in scientific lingo.

3D BDX is a more complicated product since it’s formulated to safely dissolve and remove all types of iron contamination. That includes brake dust and dissolved iron in our water supplies, both city water and well water but 3D BDX goes further. It also safely removes other common forms of chemical contamination on vehicles including, brake dust, iron contamination, traffic pollution, industrial fallout, and oily road film.

Features:

• Above all, removes brake dust, iron, industrial fallout, and road film.
• Acid-free, pH balanced, biodegradable, and VOC-compliant.
• Safe on all wheel types and clearcoat finishes.
• Color-change indicates contamination removal.
• In addition, Brake Dust Remover prevents corrosion and surface damage.

Directions:

1. Firstly, wash wheels or panels first.

2. Secondly, spray evenly on the surface.

3. After that, wait for color change if contamination is present.

4. Rinse thoroughly with water.

5. Continue with the next detailing step.

With 3D Brake Dust Remover, you can ensure your wheels and paint stay clean, protected, and ready for polishing or coating.